Stress Analysis Report

 Summary

Author

0x6f736f646f

 Project

Part Number	shearningMachineAssembly
Designer	0x6f736f646f
Cost	Ksh0.00
Date Created	19/06/2021

 Status

Design Status

WorkInProgress

 Physical

Mass	8.73379 kg
Area	232475 mm^2
Volume	1112060 mm^3
Center of Gravity	x=-46.8456 mm y=38.7049 mm z=8.70715 mm

Note: Physical values could be different from Physical values used by FEA reported below.

General objective and settings:

Design Objective	Parametric Dimension
Study Type	Static Analysis
Last Modification Date	30/07/2021, 23:11
Detect and Eliminate Rigid Body Modes	No
Separate Stresses Across Contact Surfaces	Yes
Motion Loads Analysis	No

Mesh settings:

Avg. Element Size (fraction of model diameter)	0.1
Min. Element Size (fraction of avg. size)	0.2
Grading Factor	1.5
Max. Turn Angle	60 deg
Create Curved Mesh Elements	No
Use part based measure for Assembly mesh	Yes

 Material(s)

Name	Steel, Mild
General	Mass Density	7.85 g/cm^3
	Yield Strength	207 MPa
	Ultimate Tensile Strength	345 MPa
Stress	Young's Modulus	220 GPa
	Poisson's Ratio	0.275 ul
	Shear Modulus	86.2745 GPa
Part Name(s)	body.ipt Lower blade.ipt Upper blade.ipt Support.ipt handlesupport.ipt handle.ipt Stand.ipt

Name	Stainless Steel
General	Mass Density	8 g/cm^3
	Yield Strength	250 MPa
	Ultimate Tensile Strength	540 MPa
Stress	Young's Modulus	193 GPa
	Poisson's Ratio	0.3 ul
	Shear Modulus	74.2308 GPa
Part Name(s)	Bolt.ipt Washer.ipt Nut.ipt Bolt.ipt Washer.ipt Nut.ipt Bolt.ipt Washer.ipt Nut.ipt Bolt.ipt Washer.ipt Nut.ipt Bolt.ipt Washer.ipt Nut.ipt Bolt.ipt Washer.ipt Nut.ipt Bolt.ipt Washer.ipt Nut.ipt Bolt.ipt Washer.ipt Nut.ipt

 Operating conditions

 Force:1

Load Type	Force
Magnitude	10.000 N
Vector X	-0.000 N
Vector Y	9.962 N
Vector Z	0.872 N

 Selected Face(s)

 Force:2

Load Type	Force
Magnitude	100.000 N

 Selected Face(s)

 Fixed Constraint:1

Constraint Type

Fixed Constraint

 Selected Face(s)

 Results

 Parametric Configuration:1

  Reaction Force and Moment on Constraints

Constraint Name	Reaction Force		Reaction Moment
	Magnitude	Component (X,Y,Z)	Magnitude	Component (X,Y,Z)
Fixed Constraint:1	89.977 N	23.5709 N	1.12543 N m	0.253816 N m
		86.2889 N		-0.145046 N m
		-9.7209 N		-1.0868 N m

 Result Summary

Name	Minimum	Maximum
Volume	1112060 mm^3
Mass	8.73379 kg
Von Mises Stress	0.000000946634 MPa	5.50151 MPa
1st Principal Stress	-0.770633 MPa	2.74524 MPa
3rd Principal Stress	-5.69371 MPa	0.262106 MPa
Displacement	0 mm	0.00527388 mm
Safety Factor	15 ul	15 ul

 Figures

 Von Mises Stress

 1st Principal Stress

 3rd Principal Stress

 Displacement

 Safety Factor